Gorgeous and Practical: This electric potter's wheel machine is beautiful in appearance, colorful, and the plate is large enough, with a diameter of 24 cm (9.45 inches); the body is spray-painted, ergonomically designed, and well-detailed.
High quality: DIY clay tool forming machine is compact, small footprint, good mudguarding effect; and easy-to-clean ABS movable basin.
Flexible operation: The electric potter's wheel ceramic machine is equipped with a handle and a foot pedal; the wheel rotates smoothly, with low noise, and the rotation direction can be switched clockwise or counterclockwise.
Safety protection device: single-phase three-wire system, with leakage protection device, safe and reliable operation; advanced high-quality brushless motor, the speed can reach 0-300 rpm; low noise less than 60dB.
Wide range of uses: The ceramic molding machine can be used for throwing and throwing; it is suitable for school teaching, pottery bars and home use; it can meet the needs of most professional and amateur ceramic lovers.
Feature:
Specifications: Power: 350W
Plug: UK Plug Color: Green
Material: steel + aluminum alloy
Wheel diameter: 24cm/9.45in
Voltage: AC 110-220V Speed: 0-300r/min stepless
Noise amplitude: less than 60dB
Motor: Advanced brushless motor
User Manual:
1. Check the stability of the machine before use. If the machine is unstable, it needs to be adjusted to the bottom of the lifting feet. After the machine is stable, connect the power supply.
2. After the device is powered on, push the leakage protector to the ON button and turn the forward or reverse switch.
3. Do not press the turntable by hand when the machine is running.
4. When the machine is running, the forward and reverse switches cannot be switched instantaneously until the machine is completely stationary.
5. Do not pour a lot of water into the basin. Once a large amount of water is poured into the basin, the power supply will be cut off in time for cleaning.
6. Students and children must operate under professional guidance
7. After the machine is used, power off and clean up in time.
High quality: DIY clay tool forming machine is compact, small footprint, good mudguarding effect; and easy-to-clean ABS movable basin.
Flexible operation: The electric potter's wheel ceramic machine is equipped with a handle and a foot pedal; the wheel rotates smoothly, with low noise, and the rotation direction can be switched clockwise or counterclockwise.
Safety protection device: single-phase three-wire system, with leakage protection device, safe and reliable operation; advanced high-quality brushless motor, the speed can reach 0-300 rpm; low noise less than 60dB.
Wide range of uses: The ceramic molding machine can be used for throwing and throwing; it is suitable for school teaching, pottery bars and home use; it can meet the needs of most professional and amateur ceramic lovers.
Feature:
Specifications: Power: 350W
Plug: UK Plug Color: Green
Material: steel + aluminum alloy
Wheel diameter: 24cm/9.45in
Voltage: AC 110-220V Speed: 0-300r/min stepless
Noise amplitude: less than 60dB
Motor: Advanced brushless motor
User Manual:
1. Check the stability of the machine before use. If the machine is unstable, it needs to be adjusted to the bottom of the lifting feet. After the machine is stable, connect the power supply.
2. After the device is powered on, push the leakage protector to the ON button and turn the forward or reverse switch.
3. Do not press the turntable by hand when the machine is running.
4. When the machine is running, the forward and reverse switches cannot be switched instantaneously until the machine is completely stationary.
5. Do not pour a lot of water into the basin. Once a large amount of water is poured into the basin, the power supply will be cut off in time for cleaning.
6. Students and children must operate under professional guidance
7. After the machine is used, power off and clean up in time.